DIY Oven Repair: Replacing the 316075103 Frigidaire Oven Heating Element

Is your oven failing to heat up or baking unevenly? The culprit might be a faulty heating element. Luckily, replacing the 316075103 Frigidaire oven heating element is a straightforward DIY repair you can tackle with a few basic tools. This guide will walk you through the process to restore your oven to optimal performance.

Why Replace the 316075103 Heating Element?

The 316075103 heating element is a key component responsible for evenly distributing heat during the baking cycle. When it fails, you might notice:

• The oven doesn’t heat up.

• Food takes much longer to cook or bakes unevenly.

• Visible damage, like burn marks or breaks in the element.

Replacing it promptly ensures your oven works efficiently and avoids more costly repairs down the line.

Tools and Materials Needed

Before starting, gather these tools and materials:

• Replacement part: 316075103 Frigidaire Oven Heating Element

• Screwdriver (Phillips and flathead)

• Nut driver or wrench (if applicable)

• Needle-nose pliers

• Work gloves

• Flashlight

• 
  

Step-by-Step Instructions

1. Safety First

   • Turn off the oven and unplug it from the power source.

   • If your oven is hardwired, switch off the circuit breaker to avoid electrical hazards.

2. Locate the Heating Element

   • Open the oven door and remove the oven racks for better access.

   • The heating element is usually mounted on the back wall of the oven interior.

3. Remove the Old Heating Element

   • Use a screwdriver to remove the screws securing the heating element to the back wall.

   • Gently pull the element forward to expose the electrical connectors.

   • Use needle-nose pliers to disconnect the wires from the element terminals. Take note of their placement for reassembly.

4. Install the New Heating Element

   • Connect the wires to the new heating element, ensuring they are secure.

   • Carefully position the element back into place and reattach the screws.

5. Test the Oven

   • Plug the oven back in or restore power via the circuit breaker.

   • Turn the oven on and set it to bake at 350°F to test if the new element heats up properly.

6. Reassemble and Clean Up

   • Once you confirm the element is working, reinstall the oven racks and close the door.

Tips for Success

• Double-check that power is off before starting to avoid electrical shock.

• Wear work gloves to protect your hands from sharp edges.

• Keep a flashlight handy to clearly see the connectors and screws.

When to Call a Professional

While replacing the 316075103 heating element is a simple repair, there are cases where professional help might be needed:

• If you’re uncomfortable working with electrical components.

• If the issue persists after replacing the element.

For reliable appliance repair services, contact Atlanta City Appliance Repair, Inc if you are in Alpharetta, GA

Conclusion

Fixing your oven with a DIY heating element replacement saves time and money while keeping your appliance running smoothly. With the 316075103 Frigidaire Oven Heating Element, you can bring your oven back to life and get back to enjoying perfectly cooked meals!

Have any questions or need assistance? Let us know in the comments below!