Product Description
The Samsung DC47-00016A Dryer Thermal Cut-Off Thermostat, also cross-referenced with Whirlpool WP35001087 (35001087), is an important temperature-sensitive safety component designed for select Samsung, Whirlpool-built, Maytag, Amana, and Kenmore dryers.
This thermal cut-off device helps protect the dryer from excessive heat by interrupting the electrical circuit when its specified temperature limit is reached. A failed or open thermal cut-off can prevent the dryer from starting or heating, depending on the appliance's electrical design.
Replacing a defective thermal cut-off thermostat can help restore proper dryer operation once the underlying cause of overheating has been identified and corrected.
Common Dryer Problems This Part May Fix
Dryer will not start
Dryer drum does not turn because the safety circuit is open
Dryer runs but produces no heat on certain models
Dryer stops operating following an overheating event
Failed thermal cut-off confirmed through electrical testing
Open circuit or no continuity through the thermal cut-off device
Important: These symptoms may also result from a defective heating element, thermostat, motor, control board, wiring, or other components. Proper diagnosis is recommended before purchasing.
Product Specifications
Samsung OEM Part Number: DC47-00016A
Whirlpool OEM Part Number: WP35001087
Original Whirlpool Part Number: 35001087
Part Type: Dryer Thermal Cut-Off Thermostat / Thermal Safety Device
Appliance Type: Clothes Dryer
Voltage Rating: AC 125/250V
Current Rating: 25A
Temperature Marking: 85°C / 185°F
Electrical Connections: Two terminals
Quantity: 1 thermostat
Condition: New
Application: Select gas and electric dryers
These are cross-referenced OEM service part numbers. The actual brand and manufacturer of the item supplied should match the product selected at checkout.
Compatible Dryer Models
The DC47-00016A and WP35001087 part numbers appear in published manufacturer and supplier compatibility catalogs for numerous Samsung-manufactured dryers and select Whirlpool/Maytag applications.
Samsung Dryer Models
DV203AEW/XAA, DV203AGS/XAA-0000, DV203AGW/XAA-0000, DV206AES/XAA-0000, DV206AGS/XAA-0000, DV209AEW/XAA-0000, DV209AGW/XAA-0000,
DV210AEW/XAA, DV210AGW/XAA, DV218AEB/XAA-0000, DV218AEW/XAA-0000, DV218AGB/XAA-0000, DV218AGW/XAA-0000,
DV219AEB/XAA-0000, DV219AEW/XAA-0000, DV219AGB/XAA-0000, DV219AGW/XAA,
DV220AEW/XAA, DV220AGW/XAA, DV2C6BEW/XAA-0000, DV2C6BGW/XAA-0000,
DV306LEW/XAA, DV306LGW/XAA, DV316BEC/XAA, DV316BEW/XAA, DV316BGC/XAA, DV316BGW/XAA, DV316LES/XAA, DV316LEW/XAA,
DV410AEW/XAA, DV410AER/XAA, DV410AGR/XAA, DV410AGW/XAA,
DV511AGR/XAA, DV520AEW/XAA, DV520AGW/XAA, DV5451AGW/XAA.
Additional Samsung Dryer Models
DV395ETPASU/A1, DV400GWHDWR/AA, DV40J3000EW/A2, DV40J3000GW/A2,
DV42H5400EF, DV45H7000EW/A2, DV45H7000EP/A3, DV45H7000GP/A3,
DV45K6200EW/AC, DV45K6200EZ/A3, DV45K6200GW/A3, DV45K6500EW/A3,
DV48H7400EW/A2, DV48J7700EW/A2, DV50K8600EW/A3, DV50K8600GW/A3,
DV52J8700EW/A2, DV52J8700GW/A2, DV56H9000EW/A2.
Maytag Dryer Models
MDE6700AYW, MDE6700AZW, MDE9700AYM, MDE9700AYW, MDE9700AZM,
MDG6700AWM, MDG6700AWW, MDG9700AWM, MDG9700AWW.
Kenmore Dryer Models
40289032010, 40289032011, 40289032012,
40299032010, 40299032011, 40299032012.
Other Compatible Model References
YNED7200TW0,
59289622, 59289653, 59289679, 59289683, 59299622, 59299653.
Compatibility Notice: The models above are reported by published OEM and supplier compatibility references. This is not a complete fitment list, and every model/revision has not been independently checked against an exploded parts diagram. Verify your complete model number, including suffix and revision, before ordering.
Replacement and Cross-Reference Part Numbers
DC47-00016A
WP35001087
35001087
AP4201894
AP6008681
PS4205213
PS11741821
The AP and PS numbers are supplier catalog references rather than manufacturer-issued OEM part numbers.
Why Does a Dryer Thermal Cut-Off Fail?
A thermal cut-off device can open when a dryer reaches an unsafe temperature. Possible contributing conditions include:
Restricted exhaust vent or excessive lint accumulation
Blocked or improperly installed dryer vent duct
Defective operating or high-limit thermostat
Heating element malfunction
Restricted airflow through the dryer
Other electrical or temperature-control problems
A thermal cut-off should not be bypassed or replaced without checking for the underlying cause of overheating.
Installation and Safety Information
Disconnect electrical power before servicing the dryer.
For gas dryers, shut off the gas supply before beginning repairs.
Locate the thermal cut-off according to the appliance's model-specific service documentation.
Inspect the wiring and terminals for damage or overheating.
Test the device using a multimeter and the manufacturer's diagnostic specifications.
Replace the defective component with the correct model-compatible replacement.
Check the venting system, airflow, and related safety controls before returning the dryer to service.
Never bypass a thermal fuse or thermal cut-off safety device.
Professional installation is recommended if you are not experienced with electrical appliance repairs.
Order Samsung DC47-00016A / Whirlpool WP35001087 Dryer Thermostat
Find replacement dryer thermostats and thermal safety components at AppliancePartsDealer.com.
Whether your dryer is not starting, has stopped heating, or has experienced an overheating condition, confirm the correct part through your appliance's model number and service documentation.
Need help finding the right dryer part? Contact Appliance Parts Dealer with your complete dryer model number, and our team can help identify the correct replacement before you order.

